CNG Gas Dryer - Regenerable Single Tower Natural Gas Dryer, inlet 5-120 psi, Flo

Regenerable Single Tower Natural Gas Dryer AutoDew Feature Flow Rate: 336 scfm / 540NM3/hr at 10 psi 1561 scfm / 2509NM3/hr at 100 psi 1876 scfm @ 120 psi Operating Pressure: 5-120 psig (34-827 kPag) System relief valve setting: 150 osig (1,034 kPag) Classification: Class I, Division 2, Group D Requirements: Connection size class 150# RF ANSI B16.5 3-in flange Features: Closed loop, operator-initiated heat reactivated regenerated cycles for reliable dryer regeneration control and shutdown AutoDew feature will signal when regeneration is required Natural gas dryers remove water vapor prior to storing or using natural gas for a vehicle fuel. High water content can cause blockage of CNG in fueling systems and can contribute to corrosion in storage vessels and piping. The need for a dryer is determined by the water content of the incoming gas and the minimum ambient temperature. The dryer uses molecular sieve adsorbent desiccants to remove water vapor to extremely low levels. After operating for a period of time, the dryer has removed so much moisture that it requires regeneration (heat evaporation process) or replacement of the desiccant. Dryers typically include a hygrometer, which identifies when the desiccant is completely saturated. Regenerating Inlet Dryer is provided with a regeneration system that can periodically remove the water from the desiccant by itself. The additional equipment includes a heater, blower, and condenser. This Dryer was professionally decommissioned from a CNG station owned and operated by a Local Distribution Gas Company (LDC) and managed by Clean Energy. There is a small dent at the top of the dryer we will fix that The dryer was fully functional with all of the required service and maintenance up to date prior to decomissioning. This can be aniIdeal solution for any CNG / RNG / Stranded gas project. Contact Info@gasequipmentforsale.com