2020 ANGI CNG Fueling Station with NG300 2 x 250HP CNG Compressors - Entire CNG Equipment Package

BRAND NEW Complete CNG Fueling Site Equipment Package! Perfect for large CNG Fleet fueling or tube trailer fueling from the site with gas inlet pressure 150 psi+. Will provide a compression rate of 2000 scfm on direct fill with inlet pressure over 260 psi.

Compression rate @ 2000 SCF per minute / 16 GGE a minute on direct fill / 120 MCF per hour / 2,760 MCF per day (23 hours)

The Package includes everything needed to build a state of the art CNG Fill Station:

• 2 of ANGI 300 (250 HP Ariel JGQ/2 3 stage compressors
• 1 Large Capacity CNG Dryer ( Rated 3078 SCFM)
• 1 Motor Starter panel for 2 compressors
• 1 CP-400 Remote Monitoring System
• 2 ANGI NZ2 CNG Dispenser - Single hose, Single sided configuration
• 1 ANGI NZ3 CNG Dispenser - Dual hose, Dual sided configuration
• 1 Matrix Valve Panel  designed for input from up to 3 compressors and output up to 3 dispensers + time fill hose + Storage
• ANGI Next Generation Structural Time Fill Hose Post for tube trailer fill with Hose Pole Start/Stop HMI Interface, Start/Stop Buttons, Single code HMI authorization for private fueling
• Dispensers forms, connections and all parts to properly install the equipment in place
• Engineering drawings and schematics

The equipment is sold as a package at a highly discounted price. We may consider selling just compression and all related to it components (no dispensers or dryer) but preferences will be given to those customers willing to buy the entire package.

More details:

ANGI   NG300E   Electric Drive Simplex Compressor Package  - 2 Units

·      Ariel JGQ/2, 3-Stage Reciprocating Compressor

·      Each compressor to provide up to 1,026 SCFM capacity @ 266 PSIG inlet pressure (250 HP) each compressor to outlet pressure of 4500 PSIG

o   433 SCFM flow capacity @ 116 PSIG compressor inlet pressure (141 HP) – minimum

o   1,026 SCFM flow capacity @ 266 PSIG compressor inlet pressure (250 HP) – maximum

·      Inlet pressure regulated by others as required

·      250 BHP, 480VAC, 1800 RPM TEFC electric motor

·      ANGI control system with Horner XL7 PLC

·      Protective enclosure with ANGI’s Corrosion Resistant Paint Spec includes sound attenuation, interior light, and gas detector

·      Standard operating temperatures -20 to 105F

·      Electrical conduits enter skid through internal pit

Compressor Connection Materials

·      Kit contains: ball valve, check valve, basket strainer, flex hose, and gaskets (standard)

·      For 2 compressors

·      Does not include site pressure regulator and relief valve

CNG Dryer, ANGI Model: GD-036-S-M-460-300-3 (Sized for operation of up to three (3) NG300E’s)

·      ANGI Model: GD-036-S-M-460-300-4

·      Single tower with onboard manual regeneration

·      Rated 3078 SCFM at 270 PSIG

·      Approximately 3 psi pressure drop

·      Approximately 119 hours runtime between regeneration cycles (based upon 7#H2O/MMSCF)

·      Control system with PLC

·      Dew point monitor and vent stack

Motor Starter Panel, (2) Compressor, 250 HP each

·      Soft start motor starter

·      NEMA 3R Enclosure to be installed in a non-hazardous area

·      65 kA SCCR rating

·      Includes ESD circuit

·      Includes main disconnect, 480V circuit breaker. (Factory trip setting to be confirmed with submittal documents)

·      Standard operating temperatures from -20 to 105F

CP-400 Remote Monitoring System

·      Monitoring and data collection of the complete fueling process.

·      Detailed fault alerts via email and SMS text

·      Customer supplied network communication to internet required.

·      Suitable for temperature -20F to 105F

·      Pre-configured to integrate into the ANGI Portal Asset Management Platform

·      Required to add site equipment to the ANGI Portal Asset Management Platform

·      For ANGI supplied equipment in this proposal only

ANGI NZ2 CNG Dispenser

·      Single hose, Single sided configuration

·      Single inlet supply line

·      3/4” inlet connections

·      1” internal tubing

·      One Micro Motion CNG50 mass flow meter per side

·      Side A Hose – Parker .” x ⅜” twin line CNG hose assembly

o   10’6” total hose length with main line and vent line breakaways

o   OPW CT5000 Heavy Duty Type 1 nozzle

·      Side B Hose - NA

·      Full cabinet heater (optional)

·      Gilbarco Encore 700S CRIND (Card Reader In Dispenser)

o   EMV compliant

o   5.7”color screen

o   EMV chip card reader

o   Graphics package not Included in base price (available as a cost add option; may impact lead time)

ANGI NZ3 CNG Dispenser

·      Dual hose, Dual sided configuration

·      Single inlet supply line

·      3/4.” inlet connections          

·       1” internal tubing

·      One Micro Motion CNG50 mass flow meter per side

·      Side A Hose – Parker .” x ⅜” twin line CNG hose assembly

o   10’6” total hose length with main line and vent line breakaways

o   OPW CT5000 Heavy Duty Type 1 nozzle

·      Side B Hose - Parker .” x ⅜” twin line CNG hose assembly

o   10’6” total hose length with main line and vent line breakaways

o   OPW CT1000 Light Duty Type 1 nozzle

·      Full cabinet heater (optional)

·      Gilbarco Encore 700S CRIND (Card Reader In Dispenser)

o   EMV compliant

o   5.7”color screen

o   EMV chip card reader

o   Graphics package not Included in base price (available as a cost add option; may impact lead time)

Matrix Valve Panel  [3 x 3 + TF + Storage]

·      1” design construction with actuated control valves

·      Local Horner PLC Controls

·      (3) compressor in connections

·      (3) dispenser out connections

·      time fill out connection (non-metered)

·      buffer storage in/out connection

ANGI Next Generation Structural Time Fill Hose Post – 2 Position

·      ANGI Improved Hose Post

·      Modular Design to attach up to four (4) hoses

·      Includes leak free manifold with four hose connection ports, pre-drilled retractor bracket and holsters

·      Can be mounted to grade, caisson or K-Rail (K-Rail bracket is width adjustable)

·      Two (2) hanging hardware assemblies as follows:

o   15’ total hose length (Parker 3/8” fill x 3/8” vent) with standard retractor, Staubli P36 nozzle and Snap-Tite Breakaway on supply and vent hoses

o   Hose assembly is pressure tested

o   Manifold connection fittings included

Hose Pole Start/Stop HMI Interface

·      Start/Stop Buttons

·      Single code HMI authorization for private fueling

·      Fueling commences after input of supplied PIN

·      Non Weights and Measures

Pre-purchase inspections are welcomed during normal business hours upon appointment scheduled in advance. We would be happy to provide a complimentary transportation pick up from DFW Airport and back if you want to fly in and see/send someone to inspect the compressor skid in person. In addition, we can do Facetime/teams/ Zoom calls to go over the skid in person for any domestic /international procurement. Please keep in mind that we are in Dallas and therefore are on the US Central Time (CT) for any communication arrangements.

Shipping Arrangements: The unit is currently located at our South Dallas, Texas yard. We can assist with shipping arrangements and when properly scheduled, we will provide loading service at no additional charge.

Payment: Payment in full FOB for our yard in South Dallas is required for equipment procurement. We prefer to see/meet the purchaser to ensure we can provide adequate after-sale support to set your project for success. We will require a verifiable Cashier check as a payment if you are planning to come in person. We will require a wire transfer in full with the transaction cleared the company account before releasing the equipment to any 3-rd party shipper companies.

We are here to help and make this transaction as simple as possible, but will take all necessary measures to protect us and you.